RELIFE RL-20A Desoldering Wire/Less Residue

RELIFE RL-20A Desoldering Wire / Less Residue — Product Description

📌 What It Is

The RELIFE RL-20A is a desoldering braid (also known as desoldering wire or soldering wick) designed to remove excess solder from printed circuit boards (PCBs), component leads, BGA pads, and other soldered areas during repair and rework. It’s particularly helpful when cleaning solder joints or preparing pads for new components. �

sunshinerepairtools +1

🧰 Key Features

🧵 High-Quality Copper Braid

The RL-20A is made from finely braided copper strands that quickly draw molten solder up into the braid through capillary action, making solder cleanup fast and efficient. �

sunshinerepairtools

⚡ Efficient Solder Absorption

Designed for fast heat conduction and powerful solder uptake, the braid removes solder effectively with minimal residue left behind — helping leave pads and joints clean and ready for rework. �

kbgsmstore.com

🔧 Low Residue Formula

With a “less residue” design, it minimizes leftover material after solder removal, reducing cleanup work and lowering the risk of short circuits or contamination. �

Alibaba

🔥 Flux-Enhanced Performance

Usually coated with a mild flux or specially formulated chemical coating to improve solder flow into the braid and speed up solder pickup. �

sunshinerepairtools

📏 Practical Size

Typically available in 2.0 mm width (or similar sizes), which is a versatile size for both standard components and smaller pads used on mobile phone motherboards and other PCBs. �

Daraz

📍 Typical Uses

✔ Removing excess solder from PCB pads before component replacement

✔ Cleaning up solder bridges or blobs after soldering work

✔ Preparing surface-mount pads and through-holes for resoldering

✔ Reworking BGA, ICs, connectors, and other board components where neat solder removal is critical

✔ Maintenance and repair of mobile phones, computers, and general electronics

💡 Why It’s Useful

When desoldering with only a soldering iron, solder often stays melted and spreads, making cleanup messy. The RL-20A desoldering braid solves this by absorbing molten solder quickly and efficiently, helping you achieve clean, professional results and reduce the risk of damaged pads or solder bridges. �

sunshinerepairtools

📦 Typical Specifications (Example)

Model: RELIFE RL-20A

Type: Desoldering braid / solder wick

Material: Braided copper

Width: ~2.0 mm (may vary)

Flux: Light/low-residue coating for improved performance

Use With: Standard soldering irons or stations